Whole House Reverse Osmosis Water Filtration System

Whole House Reverse Osmosis Water Filtration System

In our world today, people already know about the advantages of having purified water in their homes. With this, the need to have equipment that is capable of treating both well water and municipal water supplies keep on growing.

Whole House Reverse Osmosis Systems are increasingly becoming accepted everywhere. Like for example, in a few situations such as high total dissolved solids or high sodium content, the only practical solution for this problem is to have reverse osmosis. It also reduces harmful chemicals like contaminants such as mercury, lead, sulfides, nitrates, arsenic and many more. A lot of companies offer a wide variety of RO systems which will match your application and budget. You just have to choose wisely.

A standard Whole House Reverse Osmosis Water Filtration System consists of the following main components:

1)   Reverse Osmosis Unit – this is used to produce the daily household requirements. Take for example this situation; a 500 gallon-per-day system would normally produce purified water at the rate of approximately 20 gallons per hour. Given that 20 gallons per hour is insufficient to provide for the needs of all normal household functions, an extra storage system is essential to be to have water on hand when needed.

2)   Re-pressurization System – this consists of merely a pump that comes on automatically when water is needed and brings in pressurized water to the home. The system should ideally include a small bladder or diaphragm pressure tank that is filled with water. This pressure tank provides a more even supply of water when the demand appears and protects house pump from excessive on-off cycles.

3)   Storage Tank – this is a non-pressurized storage tank that is large enough to supply sufficient water for daily activities and needs. As water is taken from the tank, the reverse osmosis unit refills it at the same time. The water should be re-pressurized before using since it is stored in an atmospheric pressure.

4)   Pre-Treatment Equipment (if required) – in order to prevent the membrane from premature fouling, excessive mineral hardness in the water should be removed in the beginning prior to the RO treatment. A water softener (old school not common nowadays) or anti-scaling is recommended. In the case of municipality treated water, the chlorine must be removed because it will cause the membrane to deteriorate fast if it comes in contact with it. Having an activated carbon filter will do this job.

To be able to properly choose what the best whole house reverse osmosis water filtration systems are for you, there are several factors that you must consider:

1)   Water used or needed per day

2)   Required water storage

3)   Daily RO water production

These are just a few guidelines when you choose to have an RO system. And if you do choose to have it in your home, then you can now take pleasure in having purified water with the highest quality at every faucet found in your home. Whole house reverse osmosis water filtration system is the most practical method to get pure, clean and great tasting water. With this, there isn’t any guessing what’s in your water, because you’re sure that IT’S JUST CLEAN AND PURIFIED WATER!